Drilled wells
turnkey
First hydrogeology, then the rig. We drill according to layers, not estimates — and in the end, we give you an analysis, not just a hole in the ground.
Path down — step by step
Hydrogeological survey
Before any drilling, a hydrogeologist assesses the layers and groundwater level. Basis for permits and for where and how deep to drill.
Drilling
Our own rig drills through layers — topsoil, clay, sand, gravel — down to the aquifer. Typically 15—40 m depending on location.
Casing & equipment
We equip the borehole with casing and filter to keep it stable and water clean. Gravel pack with washed gravel.
Pumping test
We measure yield (l/s) and stabilized water level — how much water the well actually provides. Without this, it's a gamble.
Water analysis & pump
We take a sample for analysis and install the pump. We hand over the well with a protocol, not just a wet hole.
Everything we drill through
From drilling to clean water
Drilled Wells
Main field — small-diameter drilling into the aquifer, fast and clean.
Dug Wells
Classic ring well where water is shallow and there is space.
Pumping Tests & Analysis
Measuring yield and water analysis in the lab — basis for approval.
Boreholes for Heat Pumps
Deep boreholes for ground-source heat pumps — heating from the depths.
Pumps & Service
Design and installation of pumps, pressure tanks, service for existing wells.
Hydrogeological Report
We arrange the report and water permit — we handle the paperwork for you.
Do you need water on your property, or has your well stopped producing? We will come and take a look.
E [email protected]
T +420 776 508 777
A SPRING — drilling and wells · service throughout the region